Release date: 2018-10-29
|
New feature: |
Added support for MX2-16x16-HDMI20 and MX2-24x24-HDMI20 product variants.
|
Known issue: |
Compressed audio can be de-embedded to the analog output which results in audible noise.
|
The video parameters are not valid on an output when no sink is connected to the respective output port.
|
The value of the MaxSupportedHDCPVersion property on the output is stuck in HDCP2.2 regardless of the HDCP version supported by the attached sink. The problem does not affect the functionality.
|
The values in Input Ports > Port [n] > Video Settings > Audio Source and Input Ports > Port [n] > Analog Audio > Audio Source on the LCD display might contain ambiguous information.
|
The STATUS.EmbeddedAudioPresent property on the output has a value of 'false' even though there is embedded audio in the HDMI output signal.
|
The video signal conversion on the output is not reflected in the video parameters, although the conversion is performed.
|
When a 4k@60Hz 4:4:4 video with embedded LPCM audio is switched to an output port, and no HDMI sink (e.g. no display) is connected to the actual output, the embedded audio cannot be de-embedded to the analog output.
|
The EDID read from a sink connected to an output port might contain EDID extension portions previously read from a different sink connected to the same output port.
|
A ticking noise can be heard on the output when the volume is changed.
|
A ticking noise can be heard in the embedded audio when the volume is changed on the input.
|
The audio is not removed from the HDMI output even though the Audio output parameter is set to Analog or Off.
|
EDID cannot be read on the inputs when the matrix is in Standby state.
|
The Health Status screen for the output ports on the LCD display cannot be scrolled.
|
Sampling pattern conversion from 4:4:4 to 4:2:2 only works for 4k@60Hz.
|
The Signal type parameter on the output has no effect on whether DVI or HDMI signal is sent by the matrix. Instead, the signal type is determined by the interface standard in the basic display parameters of the EDID read on the respective output.
|